test
| Code | Item Description | 200 Series | 600 Series | 710 Series |
| OMEM200/600/710 | Mappable Ignition System | £345.00 | £545.00 | £845.00 |
| OMEM020/060/071 | ECU Programming Kit | £20.00 | £20.00 | £20.00 |
| OMEM001 | Communication Cable | £5.00 | £5.00 | £5.00 |
| OMEM1412 (200 System) | Basic Road Spec. Loom (PVC tubing & harness tape, ready built harness) | £85.00 | N/A | N/A |
| OMEM1512 (200 System) | Basic Race Spec. Loom (Raychem sleeved, ready built harness) | £135.00 | N/A | N/A |
| OMEM1513 (200 System) | Full Race Spec. Loom (Raychem sleeved, ready built harness, but with CTS,ATS & MAP connections) | £165.00 | N/A | N/A |
| OMEM1419 (600 System) | Basic Road Spec. Loom (PVC tubing & harness tape, ready built harness for basic NA engines) | N/A | £145.00 | N/A |
| OMEM1419A (600 System) | Basic Road Spec. Loom with MAP (As above, but with MAP connection for boosted engines) | N/A | £155.00 | N/A |
| OMEM1519 (600 System) | Basic Race Spec. Loom (Raychem sleeved, ready built harness for basic NA engines) | N/A | £245.00 | N/A |
| OMEM1519A (600 System) | Basic Race Spec. Loom with MAP (As above, but with MAP connection for boosted engines) | N/A | £260.00 | N/A |
| OMEM1520 (600 System) | Full Race Spec. Loom (As above, but with MAP connection & aux connections) | N/A | £295.00 | N/A |
| N/A (200 & 600 System) | Works Spec. Loom (Bespoke full Raychem, ready built harness) | By Quotation | By Quotation | N/A |
| N/A (710 System) | Full Race Spec. Loom (Bespoke Raychem sleeved, ready built harness) | N/A | N/A | By Quotation |
| OMEM1505/1502/1503 | Semi Assembled Wiring Loom (ECU connector with 3m trailing colour coded cables) | £40.00 | £50.00 | £70.00 |
| OMEM1506 | Semi Assembled Full Wiring Loom (As above, but with CTS, ATS & MAP cables) | £45.00 | N/A | N/A |
| OMEM1504 | Auxiliary Wiring Pack for Semi Assembled Wiring Loom (600 system) | N/A | £9.00 | N/A |
| OMEM4000 | Minitimer Connector 2 pin | £3.50 | £3.50 | £3.50 |
| OMEM4001 | Minitimer Connector 3 pin | £4.00 | £4.00 | £4.00 |
| OMEM4002 | Minitimer Connector 4 pin | £4.50 | £4.50 | £4.50 |
| OMEM4010 | Minitimer Connector 2 pin (male) | £3.50 | £3.50 | £3.50 |
| OMEM4030 | Ford Oval Coil Connector (Type A) | £6.00 | £6.00 | £6.00 |
| OMEM4031 | Ford Oval Coil Connector (Type B) | £5.00 | £5.00 | £5.00 |
| OMEM4050 | Connector (To suit OMEM2005 Throttle Pot General Purpose – 3 pin round to fit to loom) | £4.00 | £4.00 | £4.00 |
| OMEM4051 | Connector (To suit OEM2006/7) | N/A | £5.00 | £5.00 |
| OMEM4080 | Ford Duratec Crank Position Sensor Connector | £5.00 | £5.00 | £5.00 |
| OMEM4090 | Ford Zetec SE/Sigma Crank Sensor Connector | £4.00 | £4.00 | £4.00 |
| OMEM5010 | Relay, Mounting Base and Contacts | £6.88 | £6.88 | £6.88 |
| OMEM5020 | Crank Position Sensor Adaptor (Allows two ECUs to be run from one crank position sensor) | N/A | £37.50 | £37.50 |
| OMEM2002 | Throttle Potentiometer (to suit Weber DCOE 40/45mm Carb) | £67.00 | N/A | N/A |
| OMEM2003 | Throttle Potentiometer (to suit Weber DCOE 48mm Carb) | £70.00 | N/A | N/A |
| OMEM2004 | Throttle Potentiometer (to suit Dellorto DHLA 40/45mm Carb) | £70.00 | N/A | N/A |
| OMEM2005 | Throttle Potentiometer (General Purpose) | £52.00 | £52.00 | £52.00 |
| OMEM2006 | Throttle Potentiometer – Contactless (right hand – to fit Jenvey Throttle Bodies) | £92.00 | £92.00 | £92.00 |
| OMEM2007 | Thorttle Potentiometer – Contactless (left hand – to fit Jenvey Throttle Bodies) | £92.00 | £92.00 | £92.00 |
| OMEM2100 | Map Sensor 1 bar (Optional use on NA engines for baro correction or load) | N/A | £80.00 | £80.00 |
| OMEM2104 | Map Sensor 2.5 bar (1.5 bar of Boost) | £80.00 | £80.00 | £80.00 |
| OMEM2103 | Map Sensor 3 bar (2 bar of Boost) | £115.50 | £90.00 | £90.00 |
| OMEM2200 | Coolant Temperature Sensor (Thread M12x1.5) | £15.00 | £15.00 | £15.00 |
| OMEM2201 | Air Temperature Sensor (Thread M10 x1.25) | £15.00 | £15.00 | £15.00 |
| OMEM2210 | Coolant Temperature Sensor Fitting Kit (Drill and Tap) | £12.00 | £12.00 | £12.00 |
| OMEM2211 | Air Temperature Sensor Fitting Kit (Drill and Tap) | £9.00 | £9.00 | £9.00 |
| OMEM2355 | Zetec Coolant Temperature Sensor Adaptor (Allows OMEM2200 to fit early Ford Zetec Engines) | £8.00 | £8.00 | £8.00 |
| OMEM2356 | Zetec Air Temperature Sensor Adaptor | £8.00 | £8.00 | £8.00 |
| OMEM2301 | Narrow Band Heated Lambda (Hego) Sensor | N/A | £55.00 | £55.00 |
| OMEM2350 | Lambda Boss & Bung | N/A | £10.00 | £10.00 |
| OMEM2351 | Lambda Sensor Boss | N/A | £5.00 | £5.00 |
| OMEM2352 | Lambda Sensor Bung | N/A | £5.00 | £5.00 |
| OMEM4070 | Lambda Sensor Connector (wiring loom end) | N/A | £5.00 | £5.00 |
| OMEM4071 | Lambda Sensor Connector (sensor end, for non Omex lambda sensors onto Omex harnesses) | N/A | £5.00 | £5.00 |
| OMEM2401 | Crank Wheel Pickup Sensor (Magnetic) | £30.00 | £30.00 | £30.00 |
| OMEM2460 | Toothed Crank Wheel 36-1 teeth (140mm diameter, 5mm thick, 20mm pilot hole) | £28.50 | £28.50 | £28.50 |
| OMEM2461 | Toothed Crank Wheel 36-1 teeth (100mm diameter, 5mm thick, 20mm pilot hole) | £28.50 | £28.50 | £28.50 |
| OMEM2500 | Ballast Resistor 2R2 50W (Required for low impedance injectors) | N/A | £5.00 | £5.00 |
| OMEM2505 | Ballast Resistor 3R3 50W (Required for low impedance injectors) | N/A | £5.00 | £5.00 |
| OMEM2510 | Ballast Resistor 4R7 50W (Required for low impedance injectors) | N/A | £5.00 | £5.00 |
| OMEM2515 | Ballast Resistor 6R8 50W (Required for low impedance injectors) | N/A | £5.00 | £5.00 |
| OMEM3002 | Injector – Pico 330cc (High Impedance) | N/A | £87.50 | £87.50 |
| OMEM3003 | Injector – Pico 490cc (High Impedance) | N/A | £94.00 | £94.00 |
| OMEM3007 | Injector – Bosch 250cc (High Impedance, set of 4) | N/A | £45.00 | £45.00 |
| OMEM3008 | Injector – Bosch 450cc (High Impedance, set of 4) | N/A | £45.00 | £45.00 |
| OMEM3500 | Coil for use with distributor based systems | £48.00 | £48.00 | £48.00 |
| OMEM3505 | 4 Cyl DIS Coil Pack (use 2 for 8 cyl) | £50.00 | £50.00 | £50.00 |
| OMEM3504 | 6 Cyl DIS Coil Pack (use 2 for 12 cyl) | N/A | N/A | £115.00 |
| OMEM5000 | Potbox Tuning Aid | £200.00 | £200.00 | £200.00 |
| OMEM6003 | LED Shift Light for 200/600 ECU – 10mm Red | £7.80 | £7.80 | N/A |
| OMEM6004 | LED Shift Light for 200/600 ECU – 5mm Red | £7.80 | £7.80 | N/A |
| OMEM6005 | LED Shift Light for 710 ECU – 10mm Red | N/A | N/A | £7.80 |
| OMEM6006 | LED Shift Light for 710 ECU – 5mm Red | N/A | N/A | £7.80 |
| OMEM6010 | Clutch Switch | N/A | £6.50 | £6.50 |
| OMEM6011 | Launch Control Switch | N/A | £10.00 | £10.00 |
| OMEM6020 | Tachometer Driver | £15.00 | £15.00 | £15.00 |
| OMEM6002 | Tachometer Adaptor (For 8 cyl tachometers) | N/A | N/A | £35.00 |
| OMEM6030 | 710 Stepper Motor Control Adaptor | N/A | N/A | £35.00 |
| OMEM8000 | Universal Idle Motor & Mounting Block | £105.00 | £105.00 | £105.00 |
| Typical 4 Cylinder Twin Throttle Body set up (DCOE flange pattern) | N/A | £361.00 (pair) | £361.00 (pair) | |
| Fuel Rail (To suit push on or -6 fuel pipe) | N/A | £48.00 | £48.00 | |
| Throttle Linkage (Single Cable or twin cable with various mounting options) | N/A | £118.00 | £118.00 | |
| Airhorns (From 19mm 150mm, available in aluminium or carbon fibre) | N/A | From £72.00 for 4 | From £72.00 for 4 | |
| Inlet Manifold | N/A | Phone for details | Phone for details | |
| Typical 4 Cylinder Single Throttle Body set up (Parallel or tapered in many bore sizes) | N/A | £558.50 (price for 4) | £558.50 (price for 4) | |
| Fuel Rail (To suit -6 fuel pipe) | N/A | £72.00 | £72.00 | |
| Throttle Linkage (Single Cable or Twin Cable with various mounting options | N/A | £124.00 | £124.00 | |
| Airhorns (from 19mm to 150mm, available in aluminium or carbon fibre) | N/A | From £72.00 for 4 | From £72.00 for 4 | |
| Inlet Manifold | N/A | Phone for details | Phone for details | |
| All prices are subject to VAT @ 20% |
Hello world!
Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!